WALL2FLOOR TOPCOAT WATERPROOF PART A

Wall2Floor Top Coat Waterproof is a two-component epoxy coating designed for use within the Novacolor Wall2Floor system where increased durability and moisture resistance are required. Formulated for interior horizontal and vertical surfaces, it is especially suited to bathrooms, wet areas, and other spaces exposed to humidity or repeated contact with water.

Part A and Part B are mixed together immediately before application to create a trowel-applied coating with excellent surface hardness, wear resistance, and a seamless decorative appearance. The system can also be tinted with Novacolor’s tinting system, allowing the finished surface to combine technical performance with the refined look expected from Wall2Floor.

Once applied in two coats, Wall2Floor Top Coat Waterproof forms a continuous, joint-free surface suitable for both residential and public interiors subject to moderate-to-high traffic. Its formulation is designed so that even if the surface is scratched, moisture penetration and obvious discoloration are minimized.

Key Features

• Two-component epoxy coating
• Designed for humid and wet interior environments
• Suitable for both floors and walls
• High surface hardness and wear resistance
• Creates a seamless, continuous finish
• Trowel-applied with a stainless-steel trowel
• Tintable with the Novacolor tinting system
• Designed exclusively for use within the Wall2Floor system
• Intended to be protected with a compatible Wall2Floor Clear Finish Bi-Component final coating

Application: Mix Part A and Part B thoroughly before use. Novacolor specifies a mixing ratio of 20 kg Part A to 1.2 kg Part B for the full-size system. Apply in two coats, allowing approximately 3–4 hours between coats under recommended conditions. Approximate consumption is 0.8–1.1 kg/m² for two coats, depending on the substrate and application.

Ideal For: Bathrooms, showers and wet-area surrounds, residential floors, commercial interiors, feature walls, and other Wall2Floor installations where enhanced moisture and wear resistance are required.

Part A and Part B are both required to create the Wall2Floor Top Coat Waterproof mixture. Always follow the current Novacolor Wall2Floor technical installation instructions before application.